The cleaning work of the decanter centrifuge is to stop the centrifuge first, then close some corresponding valves, etc. Open the water valve and rinse with water for 3-5 minutes. Close the water valve and let the centrifuge run for a while before stopping, so that the water remaining in the centrifuge will be automatically discharged. If the water is very clear, it will be cleaned up. If the water is very dirty, it should be cleaned up and should continue until the water is clear.

The differential in the decanter centrifuge is where he can easily fail. The differential in the decanter centrifuge has abnormal noise during the working process. Therefore, for detailed reasons, there is a problem for the differential. For example, the differential parts have problems or they are not. Installation in place, etc., will lead to the above problems. Therefore, before the work, the differential should be checked to prevent the above problems. There is always a faulty day, and the differential in the decanter centrifuge is where he can easily fail.

If the differential in the decanter centrifuge has abnormal noise during operation, then for detailed reasons, there is a problem with the differential, for example, the differential If there is a problem with the parts, or if they are not installed, it will cause the above problems. Therefore, before the work, the differential should be checked to prevent the above problems.

The horizontal snail centrifuge, which separates the drilling suspension, adopts the principle of centrifugal sedimentation, and pushes the solid phase to the slag discharge port of the small end of the drum through the blades on the auger. Discharge, while the liquid phase flows out through the overflow hole at the big end of the drum. Achieve continuous separation for this purpose.