The belt type dewatering machine is based on the filter press model produced by Swiss waterlink company, through digestion and absorption. Austrian andritz (Anritz) and Germany klein (Klein) company and other products of the company's features, advantages, improvement, design and manufacture of a new belt-type concentrated dehydration machine, the machine has many long, many parts of similar equipment The design insufficiency has been innovated, and the concentrated dewatering zone has been added, so that the dehydration index and the running function of the series of equipments have reached the state of goodness, and at the same time, they are more neat and beautiful. It has strong adaptability to the concentration fluctuation of the feed medium, and the treatment can be large, the treatment effect is good in successive operations, and the solid content of the extruded mud cake is high. Automated operation is available 24/7.

        Horizontal Centrifugal Condensation Dehydrator Disadvantages:

1, the noise is large, there is a feeling of rapid heartbeat at the scene;

2, the change of material concentration needs to adjust the speed and speed difference in time;

3, in the high In the environment where the speed is used, the site is dirty and muddy gas is generated;

4. If the equipment of the concentrated dewatering machine is improperly operated, the mud will be blocked, and when the backwashing, the mud will be repulped. may.

Advantages: continuous operation, the slurry can be concentrated. As long as a few manufacturers in China can produce small centrifugal dewatering machines, if large centrifugal dewatering machines are selected, they can only rely on imports, which will increase engineering investment. At the same time, centrifugal dewatering machine dewatering machines are affected by the fluctuation of sludge load. Larger, the nature of the operating personnel is higher, so the general sewage treatment plant does not use the centrifugal dewatering process.

Role:

Concentrated dehydrator single-phase motor used, installed On the rotor of the motor, the circuit is connected in series in the starting circuit. When the rotor is stationary, the switch is turned on, and when the rotor reaches a certain speed, the switch is turned off. When starting, the starting circuit starts to start by the centrifugal switch, and when the certain speed reaches a certain speed, the centrifugal switch is turned off to automatically block the starting circuit, and the motor is turned into an operating condition.