In ancient times, people used one end of the rope to tie the clay pot, hold the other end of the rope, rotate the pottery jar, and centrifugally squeeze out the honey in the pot; the industrial centrifuge Born in Europe, for example, in the middle of the 19th century, the three-legged centrifuge for textile dehydration and the upper suspension centrifuge for separating crystal sugar from the sugar factory were intermittently operated and manually drained. After the slag-removing structure was improved, a centrifuge that operated in succession was presented in the 1930s, and the intermittent operation of the centrifuge was completed by automatic control.
Are there any rules for using centrifuges?
1. When the centrifuge is in the pre-cooling state, the centrifuge lid must be closed. After the centrifugation is completed, the rotor should be placed on the test bench and the residual water in the chamber should be dried. The centrifuge lid is open.
2. Rotating the head during the pre-cooling can be placed on the platform of the centrifuge, or placed on the test bench, and must not be screwed on the rotor, because once If you accidentally start, the head cover will fly out and form a fault!
3. After the screw cap is tightened, be sure to touch the gap between the rotor and the cover with your fingers. If there is a gap, unscrew and retighten until the gap is confirmed before the centrifuge can be started.
4. During the centrifugation process, the operator must not leave the centrifuge chamber. In case of abnormal conditions, the operator cannot turn off the power (POWER), press STOP. Fill in the centrifuge usage record before pre-cooling.
5. Do not use imperfect centrifugation to make the tube, and do not use aging, deformed, cracked centrifuge tubes.
6. After the holiday and the evening, you can use the centrifuge to check the safety and then leave.
7. In the event of machine failure during the use of the instrument, please contact us in time for damage.
Related News
- What factors should be considered when choosing a suitable decanter centrifuge?
- How to improve the dehydration power of the decanter centrifuge
- Why is the use rate of foreign decanter centrifuges high?
- What are the advantages of decanter centrifuges for belt filter presses?
- How to calculate the operating cost of decanter centrifuge and belt machine
- Decanter centrifuge is essential for environmental protection applications
- Problem to be aware of when using a desktop low-speed large-capacity electric centrifuge
- How to improve the production power of horizontal spiral sedimentation centrifuge
- Discussing the possible corrosion of centrifuges